The whirlpool problem of playing milk foam, the moving milk bubble drawing jar and the coffee maker steam tube Italian matching beans.

The problem of angle is to know a dead angle between a foam-drawing jar and the steam tube of a coffee machine. After watching a lot of domestic and foreign baristas beating milk foam, coupled with their own constant attempts, I found that playing milk foam has a dead angle, just like playing video games, some dead corners can not hit you, but you can hit others. This angle is very troublesome to say in words, probably to pull the flower jar.

The method of foaming with an Italian coffee machine.

① uses a special steel cup, the upper narrow and lower width is easy to form a swirl, ① uses a special steel cup, the upper narrow and lower width is easy to form a whirlpool, pour in full-fat fresh milk until three minutes full. ② first put steam to drain water, then let the steam nozzle form a 45-degree angle with the surface of the milk, and insert the steam pipe into the fresh milk about 1CM. Open the steam valve and start heating, making the fresh milk whirlpool, so that the steam and fresh milk are fully mixed to produce milk bubbles. ③ as milk

The technology of milk foam sharing the angle of milk foam and the formation of milk foam

There are three things to do when making milk foam: heat the milk, beat the milk foam, add milk to the milk kettle and add milk to 1 to 1 full start the steam valve to release the water in the steam stick. Insert the steam nozzle into the fresh milk surface about 3-5MM deep (depending on the steam nozzle and steam intensity will vary slightly) open the steam valve should hear a slight hiss at this time, control the kettle position

How to put the angle of milk pot purchase and grip to make milk foam?

There are many kinds of milk pots on the market, you can refer to the following points when choosing and buying ─. The common ones are 300ml, 350ml, 600ml, no matter how big they are, but they are generally not needed. The shape of the pot body ─ is generally a little wider at the bottom than at the top, but there are some wide and narrow in the middle, which is not conducive to milking, so it is recommended to be used as decoration. Spout groove ─ is divided into long groove type and

Summary of foam in steam pipe of Italian coffee flower-drawing machine

Prepare knowledge to understand the correct operation process of the coffee machine steam system, understand the purpose of empty steam pipes before and after foam, and understand the importance of towels and handy cleaning in coffee making. Learn how to use the sprinkler to touch the milk noodles, the location and depth of the selected points. There are two temperature problems, one is the starting and ending temperature of foaming, and the other is the temperature at which the foam is made. These two.

Another angle of fine coffee

Italian Coffee making course: detailed explanation and Correction of the problem of Milk bubbling

Prepare knowledge to understand the correct operation process of the coffee machine steam system, understand the purpose of empty steam pipes before and after foam, and understand the importance of towels and handy cleaning in coffee making. Learn how to use the sprinkler to touch the milk noodles, the location and depth of the selected points. There are two temperature problems, one is the starting and ending temperature of foaming, and the other is the temperature at which the foam is made. These two.

Why do you pour milk? Why do you pour milk?

In some places, thermometer is used to measure. I think this teaching method is not good. Technology is something that needs people's heart to understand. It is not very beneficial to improve people's own technology with the help of external forces. The fourth step is to recognize a dead angle between a milk frothing cylinder and a coffee machine steam pipe. Read a lot of domestic and foreign barista operation to make milk foam, coupled with their own constant attempts, found to make milk foam

The Angle of the Cup and the Coffee Cup and the purchase of Coffee Cup

The tall cup is a perfect match with the thick milk foam. Use a tall cup to give you enough time to merge. Full fusion can not only make the coffee taste better, but also strengthen the shape when pulling flowers, resulting in a clear drawing of eucalyptus. But the prerequisite is that the foam should be sufficient. Some people will only pour hot milk into the cup before forming and keep the foam until the end for flower drawing.

14 Health-preserving functions of Coffee from the Angle of traditional Chinese Medicine

The coffee bean is taken from the fruit of the coffee tree. It is red and red in color, enters the heart, is bitter, and merges into the path of the large intestine. The taste is bitter and bitter, fried and scorched. Glycol has nourishing and relieving effects, relieving pain, diverging pungent taste, passing through the brain-blood barrier, treating surface wind-heat, headache, bitterness, dryness and diarrhea, and treating fever or dampness. 14 Coffee breeds from the Angle of traditional Chinese Medicine

Coffee knowledge-how to use machine steam pipe to make milk foam

Understand the correct operation process of the coffee machine steam system, understand the purpose of the empty steam pipe before and after foam, and understand the importance of towels and easy cleaning in coffee making. Learn how to use the sprinkler to touch the milk noodles, the location and depth of the selected points.

How to use the machine steam pipe to make milk foam

Preparation before frothing understand the correct operation process of the coffee machine steam system, understand the purpose of the empty steam pipe before and after frothing, understand the importance of towels and hand cleaning in coffee making. Learn how to touch the milk surface with the nozzle, the position of the selected point, and the depth of the selected point. Two temperature problems: one is the temperature at which foaming begins and ends, and the other is the temperature at which foam is made.

What milk is good for coffee? Preferably whole milk.

Fresh milk. Preferably whole milk. First, the milk should be frothed. Be delicate. The first step is to let the barista beginners understand the correct operation process of the coffee machine steam system, understand the purpose of the empty steam pipe before and after the milk bubble, and understand the importance of towels and cleaning in coffee making. Step 2: Let the Barista Beginners

How to make a good foam? How to mix coffee beans with latte and concentrate beans with latte

5 o'clock will also affect the production of milk foam: 1: steam pipe diameter 2: steam pipe nozzle hole number: steam pipe diameter and steam pipe nozzle will directly affect the heating speed. 3: the shape of the steam pipe nozzle 4: the position of the nozzle hole: the shape of the nozzle and the position of the nozzle hole will affect the direction of the whole flow. 5: the angle of the steam pipe nozzle: the angle will affect the fineness of the foam.

How to make a good jar of milk foam in the technology of espresso?

So how to make a good jar of milk foam? In fact, this thing cannot be taught with words and images. People who have a deep understanding of milk foam can only be mastered in a short period of time. This is like practicing a musical instrument, beginners must be in the teacher's hands, one-on-one professor, from shallow to deep to master the essentials, and then proficient.

In-depth Analysis of Coffee Taste from Chemical Angle

It has been said that adding salt to coffee can neutralize bitterness, which sounds ridiculous, but it has been proved to be effective by science. In 1997, scientists tried to put salt into a bitter chemical solution and compared the bitterness of the solution. It was found that although the concentration of bitter elements in chemical solvents did not change, the chemical solution with salt did not taste so bitter.

The Health Preservation of Coffee from the Angle of traditional Chinese Medicine

From the perspective of traditional Chinese medicine, there are 15 health-preserving functions of coffee: 1 refreshing, brain-waking, caffeine, aromatic alcohol, which can easily pass through the brain-blood barrier, stimulate the central meridian, promote brain activity, make the mind more clear, respond lively and sensitive, think well, concentrate, and improve work efficiency; can stimulate the cerebral cortex, promote sensation, judgment and enhance memory ability. 2 strong muscles and bones, benefit

How thick is the bubble thickness required for cappuccino? To what extent does the milk finally need to be disposed?

1.ESPRESSO (concentrated) 2.LATTE (latte) 3.cappucino (cappuccino) have seen more complete and intuitive color images on the Internet before, but they can't find them. The thickness of cappuccino foam first depends on what kind of cup you use. Generally speaking, it is easy to quantify with a standard Italian coffee cup. Concentrated, cappuccino and latte all have cups of different sizes. A ration of coffee

The trick of coffee flower drawing

1 milking: the most important technique, although not very advanced, but requires a long time of practice, requires fine and smooth milk foam, do not have large foam. 2 milking angle: it is best to milk at an angle of 45 degrees with the steam sprinkler, depending on the thickness of the foam according to the fluctuation. Three hearts!

Is the milk of the coffee flower boiled?

The milk is initially cold (preferably refrigerated at 5 ℃), which prolongs the foaming time so that it foams thoroughly and finely, then opens the steam valve and foams the milk. When foaming is consistent with our body temperature (feel neither hot nor cold), the foaming is cut off. Next, let's talk about the temperature at the end of milking. In fact, there are many theoretical theories about this temperature.