Characteristics of single-group laboratory coffee roaster
1. Tubular burner
The principle of coffee roaster is introduced by DISCOVERY.
The gas burner used in our FUJIROYAL1 roaster.
Bend the iron pipe to drill 72 2.3 "holes with an electric hammer.
This process is a very practical process.
It is usually the job of a new member in our club.
2. Bunsen burner
The principle of coffee roaster is introduced by DISCOVERY.
Our FUJIROYAL3 "5" 10 "and some large roasters are used.
A gas burner with a distinctive name, a burner with a burner invented by Mr. Bunsen in Germany.
The burner used in our company has about the gas consumption of 1000KCAL.
Both the semi-hot air type and the direct-fire type are used, but the direct-fire roaster must be cleaned regularly because coffee shavings fall on the stove mouth.
3. Air gun burner
The principle of coffee roaster is introduced by DISCOVERY.
In our large roaster lineup, the burners used in roasters over 30 years old are used in completely hot air roasters.
The back end of the roaster is equipped with a hot air generator to generate hot air to bake coffee beans.
