How to use a smart cup to make a fresh cup of coffee

one

Grinding powder, not too fine, grinding to about the same thickness as sugar, if too fine, the water is not easy to flow

two

Fold the edge of the filter paper from both sides, put it into the smart cup, and inject a small amount of hot water to help remove the smell of the filter paper and preheat the filter cup. And then pour out the water. No.

three

Add the right amount of coffee powder. A small filter cup is used here, and 14 grams of coffee powder are measured.

four

Add the right amount of hot water. The water used here is 91 degrees, about 250 grams.

five

Soak for 2-3 minutes, which can be adjusted according to your taste. It is recommended to soak for no more than 3 minutes.

six

Stir a little, then put the smart cup on the coffee cup, wait a moment, the coffee liquid will flow into the cup.

seven

Move the smart cup and start enjoying the coffee.

TIPS Tips

Generally speaking, we should pay attention to two places, one is the thickness of the powder, not too fine, and the other is to grasp the time of hand brewing and soaking, so that we can make the coffee we like.

In addition, what is the so-called Smart Cup, where does cleverness come from? In fact, the secret lies in the small organ below it, which is really a wonderful design. When you put it on the table, the small piston at the bottom is sealed, so the water will not leak out, but when you put it on the cup, the small piston will be pushed open, and the water will flow naturally into the cup under the action of gravity. This is really a convenient design.