① makes an espresso. ② shakes the beaten foam well and scrapes off the thicker bubbles on the surface. ③ is first injected firmly against the edge of the cup with a small flow rate. When the injection...
Knowledge
World Gafei
Aug 26, 2014 0 views
Quick Answer
① makes an espresso. ② shakes the beaten foam well and scrapes off the thicker bubbles on the surface. ③ is first injected firmly against the edge of the cup with a small flow rate. When the injection reaches about 1/2 of the cup volume, a white dot will appear when the flow rate is increased. If the ④ maintains a larg...
① makes an espresso.
② shakes the beaten foam well and scrapes off the thicker bubbles on the surface.
③ is first injected firmly against the edge of the cup with a small flow rate. When the injection reaches about 1/2 of the cup volume, a white dot will appear when the flow rate is increased.
If the ④ maintains a large amount of traffic, the white spot will expand.
When the ⑤ is nearly full, reduce the flow and push forward. The heart shape will appear. If the cup is not full, you can continue to inject foam at the tip of the heart until the cup is full.
Was this guide helpful?
0 people found this useful
