Italian coffee machine: introduction to common problems and maintenance operation of coffee machine

Answer:

BREW UNIT BLOCK

There is a problem or blockage with the bubble group. The "after check" position needs to be cleaned.

BREW UNIT MISS

There is an error in the bubble group. It is not installed or the service is not closed.

COF. BEANS EMPTY READY FOR USE

No coffee beans. Reboot the machine after adding coffee beans.

DESCALE READY FOR USE

The scale needs to be cleaned.

DREGDRAWER EMPTY

The bean dregs trough has been drained. Clean up the bean dregs trough.

DREGDRAW MISS

The coffee residue box does not position the card.

DREGDRAWER FULL READY FOR USE

The bean dregs trough has been drained. Clean up the bean dregs trough.

ENERGY SAVING

Save the setting to start and wait for the machine. Just check ENTER.

FELL COFFEE BEANS READY FOR USE

No coffee beans. Reboot the machine after adding coffee beans.

FILL WATERTANK

The water tank is full of water. Add water to the water tank.

GRINDER BLOCKED

There is a problem with the grinding bean group. Need to clean the bean mill group, or the repairman.

OVER TEMPERATURE

Turn on the machine to drain water again.

VENTILATE

If there is no water in the water tank or internal waterway, the drainage action must be done before the tank is added.

WARMING UP

Please wait about 3-5 minutes until "SELECT PRODUCT" or "READY FOR USE" is indicated.

Source:

Looking for the fish in the direction of the blog