Coffee grinder Introduction: CAFEDE KONA grinder Electric coffee grinder

Brand: CAFEDE KONA

Model No.: CK-8072

Mode of use: electric

Method of operation:

1. Install the bean box, plug in the power supply, and the switch is "OFF" at this time.

2. Put on the adjusting ring, screw into the bean box on the main body, and rotate until the indexing tooth at the bottom of the bean box touches the adjusting ring tooth (that is, slightly

Can drive the adjusting ring to rotate), turn on the switch at this time to make the motor idle. Then press the down knob ring with one hand (adjust the ring handle at this time

Must be aimed at the "-" position on the main body), and then continue to spin slowly into the bean box until the "squeak" metal friction sound is made.

Eliminate the noise. Make the upper and lower grinding plate zero alignment, that is, zero adjustment, and then cut off the switch, at this time the coffee powder is the finest state.

3. Put in the right amount of coffee beans and close the lid.

4. The grinding thickness of coffee beans can be adjusted according to the demand, the adjustment ring handle indication "-" means the thinnest, and "+" means the thickest.

5. The amount of coffee powder can be ground according to the demand, but the grinding time should not exceed one minute.

6. Cut off the power supply, take out the powder box, and finish the coffee grinding.

Cleaning instructions:

Note: do not put the coffee base into the automatic dishwasher to clean, so as to avoid deformation.

Please cut off the power supply before cleaning.

1. Please make sure the machine is completely cooled before cleaning.

2. Do not soak the coffee maker in water or other liquids. Keep the wiring away from the liquid.

3. Use a brush to remove the residual powder from the grinding groove and grinding plate. Please do not rinse with tap water.

4. Wipe the shell and lid with a wet cloth.

5. Store the coffee maker in the original box or in a dry place.