Modern pure copper coffee brewer-let you feel the charm of coffee DIY

[introduction] the steps of making coffee brewers with copper tubes and funnels are very simple and do not require complex manufacturing equipment. Step 1: materials and tools needed funnel 1 preferably a copper tube that meets food safety requirements

The steps of making coffee brewers with copper tubes and funnels are very simple and do not require complex manufacturing equipment.

Step 1: materials and tools needed

Funnel 1 had better be in line with food safety

One 50mm for copper pipe is enough.

2 T-type tee joints

3 L-line connectors

There are 2 coppers.

One sheet of clean cloth

1 cutting tool

A bottle of metal glue

Step 2: cutting copper pipe

Look at the finished product diagram, the width of the bottom and the height of the vertical copper pipe are cut out according to your own needs.

Step 3: copper polishing

Wipe the surface of the copper tube with a clean cloth until it is bright.

Step 4: polishing both ends of copper tube

Polish both ends of the copper tube with rougher sandpaper for better curing with glue.

Step 5: Assembly bonding

Apply glue at both ends of each copper pipe, and then assemble it with the connectors according to the drawings.

Step 6: clean waiting

After all the parts are assembled and glued in place, clean the surface quickly, don't leave any glue, and then waiting... Until it's fully solidified.

Step 7: put on the funnel and then and brew a cup!

Well done!